The Best Coilovers For Your Toyota MR2 Roadster (ZZW30)
The badge on the car says MR2 Roadster and the coilover listings say MR-S or Spyder. Are they for the same car? Yes. Toyota sold the third MR2 as the MR-S in Japan, the MR2 Roadster here and the MR2 Spyder in America, and the kit makers list all of them under the chassis code ZZW30. Every spring set and coilover we list for it, 1999 to 2007, follows in price order, with what each one adjusts.
- Kits and prices read from the live site on 11 November 2026
- Four brands list suspension for the ZZW30 with us: BC Racing, TEIN, Eibach and SPAX
- Prices in the text include VAT

TEIN FLEX Z coilovers
£1,056inc VAT, part number VSY24-C1SA4
TEIN list it for the ZZW30, 1999 to 2007, with the 1.8 engine. Where the car has a front luggage-box cover, TEIN say it needs trimming or removing.
- Twin-tube dampers with 16 levels of damping
- TEIN recommend 20 to 40 mm lower at the front, 15 to 35 mm at the rear
- Springs 3 kgf/mm front and 5 kgf/mm rear
- Camber adjustment built into the front upper mounts
Roadster, MR-S or Spyder: which one is yours
Toyota built one third-generation MR2 and gave it three names. It went on sale in Japan in October 1999 as the MR-S, reached the UK in 2000 as the MR2 Roadster, and was the MR2 Spyder in America. Each has a 1.8 litre engine behind the seats and rear-wheel drive. That is why a listing for your Roadster can have MR-S or Spyder in its title.
The UK car changed once, with the 2003 model, which went on sale here in October 2002. Toyota revised the suspension, added bracing at the rear and fitted 16 inch rear wheels, keeping 15 inch at the front.
Earlier UK cars run 15 inch wheels at both ends, on 185/55 R15 front tyres and 205/50 R15 rears. None of our listings is split by that change. It does affect clearance, so Cameron asks which wheels are on the car now, front and rear, before he agrees a ride height with you.
The suspension is a strut at every corner. At the back the spring sits around the damper, just as it does at the front. A coilover kit for this car is four complete units.
| Listing | The car as the maker lists it |
|---|---|
| BC Racing coilovers | Toyota MR2 Spyder, 00 to 07, chassis code ZZW30. One listing with four builds to choose from. |
| TEIN FLEX Z | Toyota MR-S ZZW30, 1999 to 2007, 1,800 cc, mid-engine, rear-wheel drive. |
| TEIN MONO SPORT | The same car and years, for UK-market cars only. An import has to be confirmed separately. |
| SPAX SSX springs | Toyota MR2 Sport, October 1999 to June 2007, type code W3. |
| Eibach Pro-Kit springs | MR 2 III (ZZW3_), April 2000 to September 2005, 1.8 engine. Maximum axle load 540 kg front and 735 kg rear. |
From the vehicle details on each listing, read on 11 November 2026.
The ladder at a glance
Five steps, in order of price. Each price was read from the site on 11 November 2026 and includes VAT. BC Racing sell this car’s coilover as one listing with a choice of builds, so two of the steps below are the same listing with a different build picked. A third BC Racing build, the RM, sits between the FLEX Z and the ER on price and is covered in section 3.
Lowering springs
SPAX SSX
£239.99inc VAT, part number S038046
- 30 mm lower, catalogue figure
- Listed for 10/1999 to 06/2007
Height and rebound
BC Racing BR
£1,049inc VAT, BR build
- 30-way rebound adjustment
- Springs 3.5 kg/mm front and 5 kg/mm rear
Height and damping
TEIN FLEX Z
£1,056inc VAT, VSY24-C1SA4
- Twin-tube, 16-level damping
- Springs 3 kgf/mm front and 5 kgf/mm rear
2-way adjustable
BC Racing ER
£1,849inc VAT, ER build
- External reservoirs
- Same listing as the BR
Monotube
TEIN MONO SPORT
£1,932inc VAT, GSY24-71SS4
- Monotube, 16-level damping
- Springs 4 kgf/mm front and 6 kgf/mm rear
1. Lowering springs: SPAX SSX and Eibach Pro-Kit
Springs alone are the least you can do to lower a Roadster. The spring decides the ride height, the part number fixes the drop, and the car keeps the dampers it has now. We list two sets, and the catalogue figure for both is 30 mm lower.
SPAX SSX, part number S038046, is listed for the MR2 from October 1999 to June 2007 under the type code W3. That covers the whole run of cars. SPAX quote 4 to 6 weeks from ordering.
Eibach’s Pro-Kit, part number E10-82-001-01-22, is listed for cars built between April 2000 and September 2005 with the 1.8 engine. The drop is 30 mm front and rear, and Eibach print a maximum axle load of 540 kg at the front and 735 kg at the rear. A Roadster built after September 2005 falls outside Eibach’s dates, which leaves the SPAX set as the one listed for it. Eibach estimate 3 to 6 weeks, and we confirm the current figure when you order.
Eibach’s fitting notes say worn original dampers should be replaced when lowering springs go on, and that this can be due from 40,000 kilometres. The newest of these cars dates from 2007. So Cameron’s first question on a springs enquiry is how old the dampers are. If they are the ones the car was built with, read the next section before you buy springs alone.
- Price. SPAX SSX £239.99, Eibach Pro-Kit £340.08, inc VAT
- Adjustment. The spring sets the drop, 30 mm on either set as a catalogue figure
- In the box. Springs only. Eibach mark a front and a rear spring for the part number
- Buy it if. The dampers are healthy and you want the car a set amount lower with nothing to adjust
2. The first full coilovers: BC Racing BR and TEIN FLEX Z
A full coilover replaces the spring and the damper at every corner, and you set the ride height on a threaded body with the kit on the car. Two kits start at almost the same money and go about it in different ways.
TEIN’s FLEX Z, part number VSY24-C1SA4, has twin-tube dampers with 16 levels of adjustment, and one adjuster changes compression and rebound together. The springs are 3 kgf/mm at the front and 5 kgf/mm at the rear. Camber adjusts at the front upper mounts and the rear mounts are rubber.
TEIN publish a recommended range for this car: 20 to 40 mm lower at the front and 15 to 35 mm at the rear. Their own reference setting is 30 mm and 25 mm. The threads allow more than that, and TEIN say plainly that the maximum travel describes the hardware and is not a recommended setting.
TEIN attach one fitting note to this car: where it has a front luggage-box cover, the cover has to be trimmed or removed. Cameron raises that on every FLEX Z enquiry so it is agreed before the fitter starts. We have more on the range in our guide, TEIN FLEX Z coilovers explained.
- £1,056 inc VAT, part number VSY24-C1SA4
- Twin-tube dampers, 16-level damping
- Springs 3 kgf/mm front and 5 kgf/mm rear
- Recommended 20 to 40 mm lower front, 15 to 35 mm rear
BC Racing’s BR build has 30-way rebound adjustment, with a pillowball top mount at the front and rubber at the rear. Ride height is set on a separate lower bracket, so bringing the car down does not change the spring preload. The default springs are 3.5 kg/mm front and 5 kg/mm rear.
BC Racing cut the kit to the ZZW30’s damper and strut dimensions and it uses the standard mounting points, so a standard car needs no cutting or welding. The dampers can be rebuilt, and the spring rates can be changed later without replacing them. BC Racing give no lowering figure for this car. The height is set on the car, around your wheels and tyres.
- £1,049 inc VAT for the BR build, kit code C-18-BR-RA
- 30-way rebound adjustment
- Springs 3.5 kg/mm front and 5 kg/mm rear
- Pillowball front top mounts, rubber rear
-
BC Racing, BR Series Coilovers, ER Series Coilovers, RM Series Coilovers, Suspension, ZX Series Coilovers
From £1,049.00 Incl. VATFrom £874.17 Excl. VATPayPal CreditKlarna ReadySelect options This product has multiple variants. The options may be chosen on the product page
Between the two, Garreth’s tip for a road car is the FLEX Z. TEIN give a height range for this exact car, and the camber adjustment is already in the front mounts. If keeping the luggage-box cover in one piece matters to you, look at the BC Racing BR.
- Price. BC Racing BR £1,049, TEIN FLEX Z £1,056, inc VAT
- Adjustment. Ride height on both. The BR has 30-way rebound adjustment. The FLEX Z has 16 levels acting on compression and rebound together
- In the box. BC Racing list dampers, springs, lower brackets, locking collars and adjuster spanners for all four corners. TEIN list a front and rear coilover suspension kit, with their optional EDFC electronics sold separately
- Buy it if. The Roadster is a road car that sees the odd trackday and you want to set the height and the damping yourself
3. Further up the BC Racing listing: RM and ER
The BC Racing listing for the ZZW30 has more builds above the BR, and you choose the build when you order.
RM, kit code C-18-RM-MH, has inverted dampers with pillowball top mounts, and BC Racing describe it as the race-oriented build. ER, kit code C-18-ER, is 2-way adjustable with external reservoirs, which BC Racing fit for more consistent damping under sustained load. The listing gives one default spring rate for every build, 3.5 kg/mm front and 5 kg/mm rear, and the rates can be changed to suit the car.
External reservoirs need somewhere to be mounted and a clear run for their lines. Cameron goes through that with you, and with whoever is fitting the kit, before an ER is ordered.
On a kit with two adjusters, Garreth says change one thing at a time and write it down. BC Racing’s own setup notes agree. Start in the middle of the range, they say, and move a few clicks at a time.
The listing has a fourth build, ZX, at £2,014. Ask us before you choose it and we will confirm with BC Racing what that build is for your car. Our BC Racing coilover guide for Toyota shows which builds are listed for every Toyota we cover.
- Price. RM £1,399, ER £1,849, inc VAT
- Adjustment. Ride height on both. The ER is 2-way adjustable
- In the box. The same four-corner kit in the build you choose: inverted dampers and pillowball top mounts on the RM, external reservoirs on the ER
- Buy it if. Trackdays are a regular thing. Choose the ER if you will use both adjusters and the car has room for the reservoirs
4. TEIN MONO SPORT: the monotube kit
MONO SPORT, part number GSY24-71SS4, is TEIN’s monotube kit for the ZZW30. It keeps the 16-level adjuster, working on compression and rebound together, and its springs are a step up from the FLEX Z at 4 kgf/mm front and 6 kgf/mm rear.
TEIN recommend 25 to 45 mm lower at the front and 20 to 40 mm at the rear, with a reference setting of 35 mm and 30 mm. They list full-length ride height adjustment at both ends. The upper mounts follow the FLEX Z: camber adjustment at the front, rubber at the rear.
This kit is listed for UK-market cars only. If yours is an imported MR-S or Spyder, send us the chassis number and Cameron checks it with TEIN first. TEIN confirm the kit takes their EDFC controller, which is sold separately. The range is covered in our guide, TEIN MONO SPORT coilovers explained.
Garreth puts the MONO SPORT forward once the circuit is the car’s main job. The spring rates go up at both ends, so on a car that is mainly driven on the road he stays with the FLEX Z.
- Price. £1,932 inc VAT
- Adjustment. Ride height, full length, front and rear. Damping on 16 levels
- In the box. TEIN list a front and rear coilover suspension kit. The EDFC controller and its parts are extra
- Buy it if. The car is a UK-market Roadster set up around trackdays
Every spring set and coilover we list for the ZZW30
| Kit and part number | Listed for | Lowering | Price inc VAT |
|---|---|---|---|
| SPAX SSX springs, S038046 | MR2 Sport, 10/1999 to 06/2007, type W3 | 30 mm | £239.99 |
| Eibach Pro-Kit springs, E10-82-001-01-22 | MR 2 III (ZZW3_), 04/2000 to 09/2005, 1.8 | 30 mm front and rear | £340.08 |
| BC Racing BR, C-18-BR-RA | MR2 Spyder, 00 to 07, ZZW30 | Height adjustable, no figure listed | £1,049 |
| TEIN FLEX Z, VSY24-C1SA4 | MR-S ZZW30, 1999 to 2007 | Recommended 20 to 40 mm front, 15 to 35 mm rear | £1,056 |
| BC Racing RM, C-18-RM-MH | MR2 Spyder, 00 to 07, ZZW30 | Height adjustable, no figure listed | £1,399 |
| BC Racing ER, C-18-ER | MR2 Spyder, 00 to 07, ZZW30 | Height adjustable, no figure listed | £1,849 |
| TEIN MONO SPORT, GSY24-71SS4 | MR-S ZZW30, 1999 to 2007, UK-market cars | Recommended 25 to 45 mm front, 20 to 40 mm rear | £1,932 |
| BC Racing ZX, C-18-ZX | MR2 Spyder, 00 to 07, ZZW30 | Ask us | £2,014 |
Read from each listing on 11 November 2026. Lowering is the maker's figure on the listing and depends on the suspension the car has now.
Before you order
- The car. A UK Roadster, or an imported MR-S or Spyder. Send the registration, or the chassis number for an import
- Build date. Early car, or 2003 model onwards. Eibach's springs are listed up to September 2005
- Wheels and tyres. This car runs different sizes front and rear, so give us both: width, offset and tyre size, plus any spacers
- What has changed. Tell us if the car is already lowered, has had an engine swap or carries a hardtop
- Luggage-box cover. If you are choosing the FLEX Z, agree the trimming with your fitter first
- Worn parts. Ask the fitter to check the bushes, drop links and top mount bearings while the old suspension is off
- Alignment. Book it for once the height is set and the car has settled, and keep the printout
Common questions
Is the MR2 Roadster the same car as the MR-S and the MR2 Spyder?
They are the same generation of MR2 under three market names: MR-S in Japan, MR2 Roadster in the UK and MR2 Spyder in America. The kit makers list them by the chassis code ZZW30, so the title on a listing may use any of the three names. A UK car is covered by every listing that matches its build date. For an import, send us the chassis number and Cameron checks it before you order.
Does anything on the car have to be cut to fit coilovers?
On the BC Racing kit, no. BC Racing say it uses the standard mounting points and a standard car needs no cutting or welding. The TEIN FLEX Z has one note: where the car has a front luggage-box cover, it has to be trimmed or removed. If you are looking at the MONO SPORT, ask us and we will check its fitting notes for your car.
How low will an MR2 Roadster go on these kits?
TEIN give a recommended range for each kit. FLEX Z is 20 to 40 mm lower at the front and 15 to 35 mm at the rear. MONO SPORT is 25 to 45 mm front and 20 to 40 mm rear. BC Racing list no figure, and the height is set on the car on the lower bracket. Both spring sets give 30 mm. Whichever you choose, Cameron checks the height you want against your wheels and tyres.
My Roadster is a 2003 or later car on 16 inch rear wheels. Does that change the kit?
It does not change the part number. The coilover listings cover the car from start to finish, and so does the SPAX spring set. Eibach’s springs are listed up to September 2005. What does change is the clearance check, because the rear wheel and tyre are a different size from the early cars, so tell us exactly what is on the car.
Can the TEIN damping be adjusted from the driver's seat?
TEIN sell an electronic controller called EDFC that does this. It is an extra, sold separately from the coilovers along with the parts it needs. TEIN confirm the MONO SPORT for this car takes it. Tell us you want it when you ask about the FLEX Z and we will confirm the parts for that kit as well.
Can I change the spring rates later?
On the BC Racing kit, yes. The springs are a standard size, so the rates can be changed without replacing the dampers, and the dampers themselves can be rebuilt. For the TEIN kits, ask us and Garreth will find out what TEIN offer for the part number you have.
How long do these kits take to arrive?
It depends on the brand. SPAX quote 4 to 6 weeks from ordering. Eibach estimate 3 to 6 weeks. The TEIN kits are supplied to order, so we give you the current lead time before you book a fitter. For BC Racing, ask us and we will give you the figure for the build you want.
What we would fit
Garreth
Garreth's top tip
For a Roadster that is driven on the road most of the time I would fit the TEIN FLEX Z. TEIN give you a height range for this exact car. There is one damping adjuster to learn, and the camber adjustment is in the front mounts.
If the car does a trackday most months, look at the BC Racing RM, or the ER if you will use both adjusters. If the circuit is its main job and it is a UK car, the MONO SPORT is the step up within TEIN.
If the dampers are fresh and all you want is the car 30 mm lower, a spring set does that on the dampers you have. The SPAX set is listed for the whole run of cars.
Cameron
Cameron's fitting view
I start with which car it is. A UK Roadster is simple. An MR-S or a Spyder has its chassis number checked against the maker's list before anything is ordered.
Then I want the wheels, front and rear separately. This car runs a different size at each end. Later cars have 16 inch rears, so I check the height you want against what is fitted.
On a FLEX Z I bring up the luggage-box cover before the order goes in. Whatever the kit, the alignment is booked for once the height has settled.
Want your Roadster checked against the listing first?
Ring us with the registration, or the chassis number if the car is an import, and tell us which wheels are on it. Cally, our digital receptionist, takes your details and Cameron comes back to you with the kit and part number for your car.
