Sparco Air Pro RJ-3 And Stand21 HANS: Our Open Face Package For Rally
Helmet package, September 2021
Our fourth helmet and HANS package is the first open face one: the Sparco Air Pro RJ-3, paired with a Stand21 Club Series 3. It is the set we would put a rally crew in.
As before, we fitted the two together on the showroom mannequin and checked them before listing, and these are the photos of the actual pair.
- Sparco Air Pro RJ-3 open face helmet with a Stand21 Club Series 3 HANS
- Helmet approved to FIA 8859-2015 and Snell SA2015
- Recesses inside for an intercom, the rally essential
- Removable black fibreglass peak
- HANS posts fitted at the factory
What is on this page
What is in the package
A Sparco Air Pro RJ-3 open face helmet and a Stand21 Club Series 3 HANS device, with a package discount when you add both from the package link.
Like the RF-5W, the RJ-3 comes with its HANS posts fitted, so the pair is ready once you have set the tether length.
The Sparco Air Pro RJ-3
The RJ-3 is Sparco’s open face helmet in the Air Pro range: a fibreglass shell reinforced with carbon and Kevlar, approved to FIA 8859-2015 and Snell SA2015, with a removable black fibreglass peak.
What makes it a rally helmet is inside. There are recesses in the lining for intercom speakers and a microphone, so driver and co-driver can hear each other over the car. The flame retardant lining comes out for washing, and the EPS liner is shaped to keep air moving.
The side view shows the peak and the factory fitted HANS post, with the Club Series 3 tether attached.
Garreth's tip for rally crews is to fit the intercom kit before the first event, not at it, and to try the helmet on with it in. Speakers change how a helmet feels around the ears.
The Stand21 Club Series 3 HANS
The other half of the package is the Stand21 Club Series 3, approved to FIA 8858-2010. It is set at 20 degrees, the angle for an upright seat in a saloon, GT or rally car, and it is injection moulded from a composite, which keeps it to around 750 g with its pads and tethers.
With an open face helmet in a rally car, the 20 degree angle suits the upright seats most crews use.
If you are not sure of the angle or size for your seat, our guide to which HANS device you need goes through it.
-
From £300.00 Incl. VATPayPal Credit0% pay-in-3Klarna ReadyTry in-storeSelect options This product has multiple variants. The options may be chosen on the product page
Who this package suits
Rally drivers and co-drivers who need an approved open face helmet ready for an intercom, and a head restraint to match. Open face helmets are for closed cars, and our guide on open face or full face explains the rule.
Measure up with our guide to measuring for a helmet before you order.
Common questions
What was in the package?
A Sparco Air Pro RJ-3 open face helmet and a Stand21 Club Series 3 HANS device, sold together with a package discount.
Is the Stand21 Club Series 3 FIA approved?
Yes. It is approved to FIA 8858-2010 and set at 20 degrees for an upright seating position.
Is the Sparco RJ-3 good for rally?
Yes. It has recesses for intercom speakers and a microphone, and HANS posts fitted at the factory.
What approvals does the Sparco RJ-3 have?
FIA 8859-2015 and Snell SA2015.
Does the RJ-3 peak come off?
Yes. The black fibreglass peak is removable.
The recesses are there, so the kit fits without cutting the lining.
Tell us which intercom you run and we will help you get the helmet, kit and HANS working together.
