BC Racing Coilovers – Nissan Silvia 240Sx (95-99) [S14]

From £874.17 Excl. VAT

BC Racing Coilovers Nissan Silvia 240Sx (95-99). Default spring rates front 6 kg/mm / rear 4 kg/mm. 6 top mount configurations to choose from. Ride height adjusts independently of spring preload, and the dampers are rebuildable.

Inc/Exc VAT
Found this product at a lower price?

Free UK shipping on all orders over ยฃ100

  • Personalized order tracking
  • Over 20 years of technical experience
  • In-store appointments available

 

Guaranteed Safe Checkout

This is the BC Racing Coilovers Nissan Silvia 240Sx kit, built to the standard strut and shock dimensions so it bolts straight to the factory mounting points. Chassis code S14. Fits 95-99 cars. Default spring rates are front 6 kg/mm / rear 4 kg/mm.

Ride height is set on the lower bracket rather than by compressing the spring. That keeps spring preload and ride height as two separate adjustments, which is the main practical reason people move off budget coilovers.

BC Racing Coilovers Nissan Silvia 240Sx specification

Vehicle Nissan Silvia 240Sx (95-99)
Chassis code S14
Manufacturer Nissan
Brand BC Racing
Default spring rates Front: 6 kg/mm / Rear: 4 kg/mm
SKU BCR-D-14

Available kit configurations

Each configuration is the same damper and spring package with a different top mount arrangement. The kit code is the BC Racing part number for that build.

Configuration Kit code Top mount
BR Series โ€“ RA: Pillowball front / rubber rear D-14-BR-RA a pillowball top mount at the front and rubber at the rear
RM Series โ€“ MA: Inverted front / rubber rear D-14-RM-MA as listed
ER Series โ€“ 2-way adjustable, external reservoir D-14-ER as listed
HM Series D-14-HM as listed
ZX Series D-14-ZX as listed
ZR Series โ€“ 3-way adjustable, external reservoir D-14-ZR as listed

Which series for the Nissan Silvia 240Sx?

  • BR Series gives you 30-way rebound adjustment and full height adjustment independent of spring preload.
  • RM Series gives you a race-oriented build with inverted damper bodies.
  • ER Series gives you external reservoirs for more consistent damping under sustained load.
  • HM Series gives you a higher-travel damper aimed at rougher surfaces.
  • ZX Series gives you raised ride height for soft-road and overland use.
  • ZR Series gives you three-way adjustment splitting low speed compression, high speed compression and rebound.

Spring rates and what is in the box

This kit ships at 6 kg/mm front and 4 kg/mm rear. The rates are matched front to rear for a balanced setup on the road. Rates are chosen by BC Racing per application, so they suit a fast road and occasional track car as supplied. If the car is built for something more specific, a track weapon or a car carrying a lot of aero, the rates can be changed without replacing the dampers.

The kit covers all four corners and includes the dampers, springs, lower brackets, locking collars and the adjuster spanners. Top mounts depend on the configuration you pick from the table above. Anything that is worn on the car already, drop links, bushes, top mount bearings, is worth checking while the suspension is apart.

Fitting and setting up BC Racing Coilovers Nissan Silvia 240Sx

Work on a flat floor, set the height on the lower brackets, then roll the car forward and back to settle everything before you take a final measurement. Alignment comes after the height is set, not before.

Set the adjusters mid-range to begin with. Adjust in small steps and change only the front or only the rear at a time, otherwise you cannot tell which change did what.

The kit is rebuildable and the springs are a standard ID, so a rate change later is a spring swap rather than a new set of coilovers.

Worth reading if you are new to this: how a coilover works and why height and preload are separate adjustments.

BC Racing Coilovers Nissan Silvia 240Sx questions

Will BC Racing Coilovers Nissan Silvia 240Sx fit without modification?

The kit is cut to the Nissan Silvia 240Sx damper and strut dimensions and uses the standard mounting points on the S14 chassis. No cutting or welding is needed for a standard car.

How low will the Nissan Silvia 240Sx go on these?

Height is adjustable across the full range of the lower bracket. How low you can usefully run depends on your wheel and tyre size and how the car is used, so set it to suit how the car is actually used.

What spring rates do BC Racing Coilovers Nissan Silvia 240Sx come with?

Front: 6 kg/mm / Rear: 4 kg/mm as standard. The springs are a standard ID, so rates can be changed later without replacing the dampers.

Do I need an alignment afterwards?

Yes. Camber and toe both move as the car comes down, so book the alignment once the ride height is set and the suspension has settled.

Are these road legal?

Adjustable suspension is legal for road use in the UK. Keep the ride height sensible, make sure nothing fouls at full lock or full compression, and tell your insurer the car has been modified.

Not sure which top mount option you need? Send us the reg and how the car gets used and we will confirm the BC Racing Coilovers Nissan Silvia 240Sx spec.

More from this range: BC Racing coilovers. Other Nissan kits: Nissan Ariya AWD, Nissan Fairlady Z (Rear Integrated) (RWD), Nissan Serena AWD.

Additional information

Brand

Vehicle Manufacturer

Kit Configuration

, , , , ,

Spring Rate

Reviews

There are no reviews yet.

Be the first to review “BC Racing Coilovers – Nissan Silvia 240Sx (95-99) [S14]”

Your email address will not be published. Required fields are marked *