H&R 33258-4 is an anti-roll bar kit for the vehicle applications below. Check the chassis, engine and any build-date or original-equipment restrictions before ordering.
Bar specifications
- Front Axle bar diameter: 28 mm
- Rear Axle bar diameter: 24 mm
- Rear Axle: two adjustment positions
This anti-roll-bar product does not provide ride-height adjustment.
Vehicle applications
The manufacturer lists this kit without a TÜV certificate. Check the exact engine list below. The catalogue specifies two adjustment positions for the rear bar.
SEAT Leon (1P1)
- 2.0 TFSI | 177kW | 1984cc | 4 cyl.
- 2.0 Cupra R | 195kW | 1984cc | 4 cyl.
Fitting notes
- Where replacement mountings are not supplied, reuse the original mounting components only if they are in like-new condition; replace worn parts before fitting.
- H&R permits the front bar to be used without the rear bar, but warns that this may increase understeer. H&R has not tested or verified using the rear bar on its own.
- Follow H&R’s installation instructions and the documents for this exact part number.
Manufacturer-listed documents: without TÜV® certificate. Check the part-specific document for its application conditions.
View H&R’s part-specific technical information and documents.
Reuse the original clamps with the supplied H&R bushes, following the illustrated clamp-separation procedure. Have a suspension specialist check the completed installation and clearances.
Fitting documents
Product image
The manufacturer supplies a representative H&R product photograph. The bar shape, mounting components and appearance can differ for this application; use the part number and specifications to select the product.
Ordering from GSM Performance
This part is ordered from our supplier. Contact us for the current lead time. Send your registration or VIN and any suspension or exhaust modifications if you would like help checking the application.
