Eibach E10-15-014-02-22 replaces the original springs on the Audi A1 3-Door / Sportback (8X) applications listed below. This four-spring Pro-Kit provides a fixed reduction in ride height while retaining the existing dampers, subject to their condition and the fitting document.
Lowering and axle limits
- Front lowering: approximately 20 mm
- Rear lowering: approximately 20 mm
- Maximum permitted front axle load: 930 kg
- Maximum permitted rear axle load: 840 kg
These are the current Eibach catalogue lowering figures for the listed applications. Actual ride height varies with original suspension, equipment and vehicle tolerances. Any existing factory lowering reduces the additional drop. This is a fixed spring kit; ride height is not adjustable.
Vehicle applications
- Audi A1 1.4 TDI 3-Door (8X): 11/2014 to 10/2018; 1422 cc diesel; 66 kW / 90 PS; engine CUSB.
- Audi A1 1.4 TDI Sportback (8X): 11/2014 to 10/2018; 1422 cc diesel; 66 kW / 90 PS; engine CUSB.
- Audi A1 1.4 TFSI 3-Door (8X): 05/2010 to 04/2015; 1390 cc petrol; 90 kW / 122 PS; engine CAXA, CNVA.
- Audi A1 1.4 TFSI Sportback (8X): 11/2011 to 04/2015; 1390 cc petrol; 90 kW / 122 PS; engine CAXA, CNVA.
- Audi A1 1.4 TFSI 3-Door (8X): 11/2014 to 10/2018; 1395 cc petrol; 92 kW / 125 PS; engine CZCA, CZDD.
- Audi A1 1.4 TFSI Sportback (8X): 11/2014 to 10/2018; 1395 cc petrol; 92 kW / 125 PS; engine CZCA, CZDD.
- Audi A1 1.4 TFSI 3-Door (8X): 04/2012 to 04/2015; 1395 cc petrol; 103 kW / 140 PS; engine CPTA.
- Audi A1 1.4 TFSI Sportback (8X): 04/2012 to 04/2015; 1395 cc petrol; 103 kW / 140 PS; engine CPTA.
- Audi A1 1.4 TFSI 3-Door (8X): 01/2011 to 04/2015; 1390 cc petrol; 136 kW / 185 PS; engine CAVG, CTHG.
- Audi A1 1.4 TFSI Sportback (8X): 11/2011 to 04/2015; 1390 cc petrol; 136 kW / 185 PS; engine CAVG, CTHG.
- Audi A1 1.4 TSI 3-Door (8X): 11/2014 to 10/2018; 1395 cc petrol; 110 kW / 150 PS; engine CZEA.
- Audi A1 1.4 TSI Sportback (8X): 11/2014 to 10/2018; 1395 cc petrol; 110 kW / 150 PS; engine CZEA.
- Audi A1 1.6 TDI 3-Door (8X): 03/2011 to 04/2015; 1598 cc diesel; 66 kW / 90 PS; engine CAYB.
- Audi A1 1.6 TDI Sportback (8X): 11/2011 to 04/2015; 1598 cc diesel; 66 kW / 90 PS; engine CAYB.
- Audi A1 1.6 TDI 3-Door (8X): 05/2010 to 04/2015; 1598 cc diesel; 77 kW / 105 PS; engine CAYC.
- Audi A1 1.6 TDI Sportback (8X): 11/2011 to 04/2015; 1598 cc diesel; 77 kW / 105 PS; engine CAYC.
- Audi A1 1.6 TDI 3-Door (8X): 11/2014 to 10/2018; 1598 cc diesel; 85 kW / 115 PS; engine CXMA.
- Audi A1 1.6 TDI Sportback (8X): 11/2014 to 10/2018; 1598 cc diesel; 85 kW / 115 PS; engine CXMA.
For front-wheel-drive vehicles without self-levelling suspension. Check the permitted axle weights on the vehicle identification plate, not its unladen weight. Match the chassis, engine and spring part numbers before ordering.
Kit contents and identification
- 2 x F11-15-014-02-VA – front springs
- 2 x F11-85-008-01-HA – rear springs
Dampers are not included. The spring markings and complete fitting certificate identify the correct components for your vehicle.
Installation details
- If fitted, check and adjust any bump-travel-dependent brake pressure reducer according to the vehicle workshop manual.
- For towing applications, consult the certificate's specific additional 45 kg rear-axle provision together with the vehicle's permitted towing and axle loads. This is a towing-specific provision; the normal rear axle limit is 840 kg.
- Have a suitably equipped workshop fit the springs and check wheel alignment and headlamp aim afterwards.
- Inspect the dampers, spring seats and mounting components, and replace worn parts before installation.
- Retain the original bump stops specified in the fitting certificate. Follow its limits on replacement dampers and spring seats.
- Check wheel and tyre clearance and the conditions for any other modifications. Lower ground clearance needs to be considered on ramps and uneven surfaces.
Download the manufacturer fitting certificate and Eibach application notes A, 18 and 20. The certificate includes German approval information and technical fitting conditions.
Product image
Eibach supplies this representative Pro-Kit photograph for the part number. Spring shape and appearance may differ; the listed part numbers and technical specifications identify the kit.
Ordering from GSM Performance
Ordered from our supplier. Contact us for the current lead time. Send your registration or VIN and details of any suspension modifications if you would like help confirming fitment.
