This TEIN FLEX Z kit uses twin-tube dampers. TEIN confirms rear damping adjustment; front adjustability is not specified in its exact-part application data. This VSGB4-C1AA2 kit is listed for the specific applications below. Match your chassis, engine and model year before ordering.
Vehicle market: Chinese-market applications only. Match the original vehicle market, chassis, engine, trim and build dates shown below. UK registration alone does not establish compatibility with UK-market versions.
Vehicle applications and ride-height settings
Height changes are relative to original equipment ride height: negative values mean lowering and positive values mean raising. Use the recommended range for your exact vehicle. The maximum adjustment range describes mechanical travel and is not a recommended operating setting. Actual height varies with vehicle condition and equipment.
Audi A4L (B8) B8 2009-2014 — Chinese-market
- Original vehicle market: Chinese-market
- Engine displacement: 2000 cc
- Drive: Front-wheel drive
- Grade / application: 35 TFSI
- Recommended front height change: -40 to -20 mm
- Recommended rear height change: -40 to -20 mm
- Maximum front adjustable range: -75 to +5 mm
- Maximum rear adjustable range: -52 to -7 mm
- TEIN reference setting: -30 mm front; -30 mm rear
- Spring rates: 10 kgf/mm front; 5 kgf/mm rear
- Upper mounts: Front: Reuse original upper mount; rear: Reuse original upper mount
- Damping adjustment: Rear: 16-level adjustment. Front: not specified in TEIN’s exact-part application data.
- Full-length adjustment: Front: not specified by TEIN. Rear: not supported.
Installation and ordering
Use a suspension specialist for installation and wheel alignment. Follow the supplied instructions and check tyre, body and suspension clearance throughout steering and suspension travel. Optional EDFC electronics are sold separately.
Supplied to order. Contact GSM Performance for current availability and lead time before booking installation.
Product photograph
The supplier catalogue photograph shows selected components associated with this part number; it is not a complete contents layout.
Application data: TEIN UK catalogue for VSGB4-C1AA2.
