TEIN FLEX Z combines twin-tube dampers with 16-level adjustment of compression and rebound together. This VSTN0-C1AA3 kit is listed for the specific applications below. Match your chassis, engine and model year before ordering.
Vehicle market: Japanese-market / German-market applications only. Match the original vehicle market, chassis, engine, trim and build dates shown below. UK registration alone does not establish compatibility with UK-market versions.
Vehicle applications and ride-height settings
Height changes are relative to original equipment ride height: negative values mean lowering and positive values mean raising. Use the recommended range for your exact vehicle. The maximum adjustment range describes mechanical travel and is not a recommended operating setting. Actual height varies with vehicle condition and equipment.
Toyota GR YARIS GXPA16 2020.09-2024.03 — Japanese-market
- Original vehicle market: Japanese-market
- Engine displacement: 1600 cc
- Drive: Four-wheel drive
- Grade / application: RC
- Recommended front height change: -40 to -20 mm
- Recommended rear height change: -35 to -15 mm
- Maximum front adjustable range: -77 to -12 mm
- Maximum rear adjustable range: -59 to -10 mm
- TEIN reference setting: -30 mm front; -25 mm rear
- Spring rates: 6 kgf/mm front; 7 kgf/mm rear
- Upper mounts: Front: Reuse original upper mount; rear: Rubber upper mount
Fitting requirements for this application: Front: the lower bracket allows camber adjustment and includes two types of Type-D adjustment collars with different offsets. The quoted data was measured on a vehicle fitted with the optional transfer case and automatic climate control.
Toyota GR YARIS GXPA16 2020.09-2024.03 — Japanese-market
- Original vehicle market: Japanese-market
- Engine displacement: 1600 cc
- Drive: Four-wheel drive
- Grade / application: RZ
- Recommended front height change: -35 to -15 mm
- Recommended rear height change: -30 to -10 mm
- Maximum front adjustable range: -72 to -7 mm
- Maximum rear adjustable range: -48 to +0 mm
- TEIN reference setting: -25 mm front; -20 mm rear
- Spring rates: 6 kgf/mm front; 7 kgf/mm rear
- Upper mounts: Front: Reuse original upper mount; rear: Rubber upper mount
Fitting requirements for this application: Front: the lower bracket allows camber adjustment; two sets of Type-D adjustment collars with different offsets are included.
Toyota GR YARIS GXPA16 2020.09-2024.03 — Japanese-market
- Original vehicle market: Japanese-market
- Engine displacement: 1600 cc
- Drive: Four-wheel drive
- Grade / application: RZ HIGH PERFORMANCE
- Recommended front height change: -35 to -15 mm
- Recommended rear height change: -30 to -10 mm
- Maximum front adjustable range: -72 to -7 mm
- Maximum rear adjustable range: -48 to +0 mm
- TEIN reference setting: -25 mm front; -20 mm rear
- Spring rates: 6 kgf/mm front; 7 kgf/mm rear
- Upper mounts: Front: Reuse original upper mount; rear: Rubber upper mount
Fitting requirements for this application: Front: the lower bracket allows camber adjustment; two sets of Type-D adjustment collars with different offsets are included.
Toyota GR YARIS XPA1G 2020-2024.03 — German-market
- Original vehicle market: German-market
- Engine displacement: 1600 cc
- Drive: Four-wheel drive
- Grade / application: See chassis, engine and years above
- Recommended front height change: -30 to -20 mm
- Recommended rear height change: -30 to -20 mm
- Maximum front adjustable range: Not specified by TEIN for this application
- Maximum rear adjustable range: Not specified by TEIN for this application
- TEIN reference setting: -30 mm front; -30 mm rear
- Spring rates: 6 kgf/mm front; 7 kgf/mm rear
- Upper mounts: Front: Reuse original upper mount; rear: Rubber upper mount
Fitting requirements for this application: TEIN lists Teilegutachten/part-certificate approval with axle loads of 970 kg front and 900 kg rear. Front: the lower bracket allows camber adjustment; two sets of Type-D adjustment collars with different offsets are included.
Installation and ordering
Use a suspension specialist for installation and wheel alignment. Follow the supplied instructions and check tyre, body and suspension clearance throughout steering and suspension travel. Optional EDFC electronics are sold separately.
Supplied to order. Contact GSM Performance for current availability and lead time before booking installation.
Product photograph
The supplier catalogue photograph shows selected components associated with this part number; it is not a complete contents layout.
Application data: TEIN UK catalogue for VSTN0-C1AA3.
