Eibach S90-2-10-021 is listed as Pro-Spacer in the supplied manufacturer catalogue. Match the vehicle, original equipment and fitting conditions below before ordering.
Vehicle applications and specification
Abarth 500 08.08 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M12x1,25×22, KG60°
- Component stamping: 91210021
- Bolt pattern / number of holes: 98/4
- Centre bore: 58
- Thread: M12x1,25
- Offset limit: 5
- Catalogue note references: S75
- Fitting note S75: From batch number 172158 (production February 2013 – pay attention to stamping on the spacer!> Article No. . Batch <) also suitable for the rear axle, if the grease cap on the rear axle is removed and inserted into the centering of the spacer!
Abarth 500 09.09 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M12x1,25×22, KG60°
- Component stamping: 91210021
- Bolt pattern / number of holes: 98/4
- Centre bore: 58
- Thread: M12x1,25
- Offset limit: 5
- Catalogue note references: S75
- Fitting note S75: From batch number 172158 (production February 2013 – pay attention to stamping on the spacer!> Article No. . Batch <) also suitable for the rear axle, if the grease cap on the rear axle is removed and inserted into the centering of the spacer!
Fiat 500 10.07 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M12x1,25×22, KG60°
- Component stamping: 91210021
- Bolt pattern / number of holes: 98/4
- Centre bore: 58
- Thread: M12x1,25
- Offset limit: 5
- Catalogue note references: S75
- Fitting note S75: From batch number 172158 (production February 2013 – pay attention to stamping on the spacer!> Article No. . Batch <) also suitable for the rear axle, if the grease cap on the rear axle is removed and inserted into the centering of the spacer!
Fiat 500 09.09 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M12x1,25×22, KG60°
- Component stamping: 91210021
- Bolt pattern / number of holes: 98/4
- Centre bore: 58
- Thread: M12x1,25
- Offset limit: 5
- Catalogue note references: S75
- Fitting note S75: From batch number 172158 (production February 2013 – pay attention to stamping on the spacer!> Article No. . Batch <) also suitable for the rear axle, if the grease cap on the rear axle is removed and inserted into the centering of the spacer!
Fiat 500 10.20 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): 0
- Component stamping: 91210021
- Bolt pattern / number of holes: 98/4
- Centre bore: 58
- Thread: M12x1,25
- Offset limit: 25
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Fiat 500 10.20 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M12x1,25×22, KG60°
- Component stamping: 91210021
- Bolt pattern / number of holes: 98/4
- Centre bore: 58
- Thread: M12x1,25
- Offset limit: 25
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Ford KA 10.08 – 05.16
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M12x1,25×22, KG60°
- Component stamping: 91210021
- Bolt pattern / number of holes: 98/4
- Centre bore: 58
- Thread: M12x1,25
- Offset limit: 5
- Catalogue note references: S3
- Fitting note S3: Only for use on the front axle!
Lancia DELTA 08.08 – 08.14
- Catalogue certificate code: Export
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M12x1,25×22, KG60°
- Component stamping: 91210021
- Bolt pattern / number of holes: 98/4
- Centre bore: 58
- Thread: M12x1,25
- Catalogue note references: S84
- Fitting note S84: Export article or in Germany only available without homologation!
Track widening is the total across the axle. Confirm the spacer thickness per wheel, fixing system, bolt engagement and wheel clearance against the exact kit instructions.
Check the manufacturer part number S90-2-10-021 and follow the fitting instructions for that exact part. Do not fit the product where the vehicle specification differs from the listed application or certificate conditions.
Manufacturer range illustration; the exact components and fittings vary by application.
