Six M10 fixing screws for mounting an aftermarket steering wheel to a standard boss kit. Part code is MOMM12941111111.
These are the bolts that go through the wheel’s six mounting holes and thread into the boss kit fixed to the steering column. Every MOMO wheel, and most wheels from OMP, Sparco and Sabelt, uses the same 70 mm PCD six-bolt pattern, and these screws fit the boss kits from any of those manufacturers.
These screws are for use without a hub spacer. If a 15 mm MOMO hub spacer sits between the boss kit and the wheel, the longer spacer fixing screws (MOMM12941111112) are needed instead; the standard screws are too short to engage the boss kit threads through the spacer. For MOMO Trek wheels, use the dedicated Trek screws (MOMM12941131126). For MOMO Tuner or Jet wheels, use the Tuner and Jet set (MOMM12941131117). Those models use a different fixing geometry that the standard screws do not match.
Thread the screws into the boss kit face and torque to the specification given by your boss kit supplier. Use thread-locking compound on the final installation. All six screws should be replaced rather than reused at every wheel change; a fastener that has been torqued, removed and re-torqued multiple times is not reliable in this application.
This set supplies six screws. No hub, boss kit or wheel is included.
