Eibach E10-40-001-01-22 replaces the original springs on the Honda Civic VII 1.4 / 1.6 Hatchback (EU, EP) applications listed below. This four-spring Pro-Kit provides a fixed reduction in ride height while retaining the existing dampers, subject to their condition and the fitting document.
Lowering and axle limits
- Front lowering: approximately 30 mm
- Rear lowering: approximately 30 mm
- Maximum permitted front axle load: 855 kg
- Maximum permitted rear axle load: 850 kg
These are the current Eibach catalogue lowering figures for the listed applications. Actual ride height varies with original suspension, equipment and vehicle tolerances. Any existing factory lowering reduces the additional drop. This is a fixed spring kit; ride height is not adjustable.
Vehicle applications
- Honda Civic VII 1.4i (EP1, EU7) Hatchback: 02/2001 to 09/2005; 1396 cc petrol; 55 kW / 75 PS; engine D14Z6.
- Honda Civic VII 1.4iS (EP1, EU5, EU7) Hatchback: 11/2000 to 09/2005; 1396 cc petrol; 66 kW / 90 PS; engine D14Z6, D14Z5.
- Honda Civic VII 1.6i (EP2, EU8, EU6) Hatchback: 02/2001 to 09/2005; 1590 cc petrol; 81 kW / 110 PS; engine D16V1, D16W7.
For front-wheel-drive vehicles without self-levelling suspension. Check the permitted axle weights on the vehicle identification plate, not its unladen weight. Match the chassis, engine and spring part numbers before ordering.
Kit contents and identification
- 2 x F11-40-001-01-VA – front springs
- 2 x F11-40-001-01-HA – rear springs
Dampers are not included. The spring markings and complete fitting certificate identify the correct components for your vehicle.
Installation details
- If fitted, check and adjust any bump-travel-dependent brake pressure reducer according to the vehicle workshop manual.
- Have a suitably equipped workshop fit the springs and check wheel alignment and headlamp aim afterwards.
- Inspect the dampers, spring seats and mounting components, and replace worn parts before installation.
- Retain the original bump stops specified in the fitting certificate. Follow its limits on replacement dampers and spring seats.
- Check wheel and tyre clearance and the conditions for any other modifications. Lower ground clearance needs to be considered on ramps and uneven surfaces.
Download the manufacturer fitting certificate and Eibach application notes A, 18 and 20. The certificate includes German approval information and technical fitting conditions.
Product image
Eibach supplies this representative Pro-Kit photograph for the part number. Spring shape and appearance may differ; the listed part numbers and technical specifications identify the kit.
Ordering from GSM Performance
Ordered from our supplier. Contact us for the current lead time. Send your registration or VIN and details of any suspension modifications if you would like help confirming fitment.
