Eibach S90-2-10-027 is listed as Pro-Spacer in the supplied manufacturer catalogue. Match the vehicle, original equipment and fitting conditions below before ordering.
Vehicle applications and specification
Audi A1 07.18 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 100/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 22
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Audi A3 05.03 -08.12
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 18
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Audi A3 04.08 – 05.13
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S1-6-14-50-27-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 18
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Audi A3 09.04 – 03.13
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 18
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Audi A3 04.12 – 10.20
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 21
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Audi A3 09.12 – 10.20
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 21
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Audi A3 05.13 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 21
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Audi A3 10.13 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 18
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Audi A3 04.20 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 10
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Audi A3 11.19 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 10
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Audi A4 11.00 – 12.04
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 19
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Audi A4 04.01 – 12.04
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 19
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Audi A4 11.04 – 06.08
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 19
- Catalogue note references: S3
- Fitting note S3: Only for use on the front axle!
Audi A4 11.04 – 06.08
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 19
- Catalogue note references: S3
- Fitting note S3: Only for use on the front axle!
Audi A4 04.02 – 03.09
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 27
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Audi A6 05.04 – 03.11
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S1-6-14-50-27-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 18
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Audi A6 03.05 – 08.11
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 18
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Audi A6 05.06 – 08.11
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 18
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Audi Q2 06.16 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S1-6-14-50-27-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 13
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Audi Q3 06.11 – 10.18
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S4-7-14-50-30-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 3
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Audi Q3 07.18 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×30, KU r=14
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 23
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Audi Q3 06.19 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×30, KU r=14
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 23
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Audi Q4 03.21 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 25
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Audi Q4 06.21 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 25
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Audi R8 04.07 – 07.15
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 27
- Catalogue note references: S89
- Fitting note S89: Only when using rims with 7,5×45° internal chamber.
Audi R8 02.10 – 07.15
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 27
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Audi R8 07.15 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 27
- Catalogue note references: S3
- Fitting note S3: Only for use on the front axle!
Audi R8 05.16 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 27
- Catalogue note references: S3
- Fitting note S3: Only for use on the front axle!
Audi TT 08.06 – 06.14
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S1-6-14-50-27-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 17
- Catalogue note references: S3
- Fitting note S3: Only for use on the front axle!
Audi TT 03.07 – 06.14
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S1-6-14-50-27-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 17
- Catalogue note references: S3
- Fitting note S3: Only for use on the front axle!
Audi TT 07.14 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 17
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Audi TT 11.14 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 17
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Cupra ATECA 09.18 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S1-6-14-50-27-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 13
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Cupra BORN 08.21 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 28
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Cupra FORMENTOR 07.20 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 10
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Cupra LEON 09.20 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 13
- Catalogue note references: S77, S100
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
- Fitting note S100: Only when using rims with 5×45° internal chamber.
Cupra LEON 09.20 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 13
- Catalogue note references: S77, S100
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
- Fitting note S100: Only when using rims with 5×45° internal chamber.
Cupra TAVASCAN 03.24 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 27
- Catalogue note references: S77, S100
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
- Fitting note S100: Only when using rims with 5×45° internal chamber.
Cupra TERRAMAR 06.24 –
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Catalogue note references: S77, S100
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
- Fitting note S100: Only when using rims with 5×45° internal chamber.
Ford CAPRI 10.24 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 20
- Catalogue note references: S77, S100
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
- Fitting note S100: Only when using rims with 5×45° internal chamber.
Ford EXPLORER 06.24 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 20
- Catalogue note references: S77, S100
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
- Fitting note S100: Only when using rims with 5×45° internal chamber.
Ford TOURNEO 02.22 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 18
- Catalogue note references: S77, S100
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
- Fitting note S100: Only when using rims with 5×45° internal chamber.
SEAT ALHAMBRA 06.10 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S1-6-14-50-27-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 5
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
SEAT ALHAMBRA 06.10 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S1-6-14-50-27-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 5
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
SEAT ALTEA 03.04 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 20
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
SEAT ALTEA 10.06 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 20
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
SEAT ATECA 04.16 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S1-6-14-50-27-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 13
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
SEAT ARONA 07.17 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 100/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 23
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
SEAT EXEO 12.08 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S1-6-14-50-27-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 15
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
SEAT EXEO 05.09 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S1-6-14-50-27-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 15
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
SEAT IBIZA 01.17 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 100/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 23
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
SEAT LEON 05.05-12.12
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 20
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
SEAT LEON 09.12 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 18
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
SEAT LEON 09.12 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 18
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
SEAT LEON 01.13 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 18
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
SEAT LEON 08.13 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 18
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
SEAT LEON 01.13 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 18
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
SEAT LEON 11.19 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: -7
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
SEAT LEON 03.20 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: -7
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
SEAT TARRACO 09.18 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 8
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
SEAT TOLEDO 04.04 – 05.09
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 20
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
SEAT TOLEDO 07.12 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S1-6-14-50-27-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 100/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 8
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Skoda ENYAQ 05.22 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 24
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Skoda ENYAQ 10.20 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 24
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Skoda FABIA 06.21 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 100/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 23
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Skoda KAMIQ 07.19 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Component stamping: 91210027
- Bolt pattern / number of holes: 100/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 20
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Skoda KAROQ 07.17 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 15
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Skoda KODIAQ 10.16 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S1-6-14-50-27-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 8
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Skoda KODIAQ 01.24 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 23
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Skoda OCTAVIA 02.04 – 06.13
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 22
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Skoda OCTAVIA 02.04 – 06.13
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 22
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Skoda OCTAVIA 11.12 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S1-6-14-50-27-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 18
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Skoda OCTAVIA 11.12 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S1-6-14-50-27-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 18
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Skoda OCTAVIA 01.20 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 16
- Catalogue note references: S77, S93
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
- Fitting note S93: Scout version without approval.
Skoda OCTAVIA 11.19 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 16
- Catalogue note references: S77, S93
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
- Fitting note S93: Scout version without approval.
Skoda RAPID 07.12 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S1-6-14-50-27-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 100/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 8
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Skoda SCALA 02.19 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 100/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 20
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Skoda SUPERB 03.08 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S1-6-14-50-27-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 20
- Catalogue note references: S3
- Fitting note S3: Only for use on the front axle!
Skoda SUPERB 10.09 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S1-6-14-50-27-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 20
- Catalogue note references: S3
- Fitting note S3: Only for use on the front axle!
Skoda SUPERB 03.15 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S1-6-14-50-27-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 16
- Catalogue note references: S3
- Fitting note S3: Only for use on the front axle!
Skoda SUPERB 03.15 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S1-6-14-50-27-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 16
- Catalogue note references: S3
- Fitting note S3: Only for use on the front axle!
Skoda SUPERB 11.23 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S1-6-14-50-27-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 25
- Catalogue note references: S93, S100
- Fitting note S93: Scout version without approval.
- Fitting note S100: Only when using rims with 5×45° internal chamber.
Skoda SUPERB 11.23 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S1-6-14-50-27-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 25
- Catalogue note references: S93, S100
- Fitting note S93: Scout version without approval.
- Fitting note S100: Only when using rims with 5×45° internal chamber.
Skoda YETI 05.09 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S1-6-14-50-27-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 15
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen ARTEON 04.17 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S1-6-14-50-27-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 16
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen ARTEON 06.20 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S1-6-14-50-27-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 16
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen BEETLE 04.11 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S1-6-14-50-27-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 3
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen BEETLE 12.12 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S1-6-14-50-27-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 3
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen CADDY 03.04 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S1-6-14-50-27-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 22
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen CADDY 03.04 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S1-6-14-50-27-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 22
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen CADDY 05.15 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S1-6-14-50-27-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 22
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen CADDY 05.15 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S1-6-14-50-27-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 22
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen CADDY 05.15 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S1-6-14-50-27-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 22
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen CADDY 05.15 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S1-6-14-50-27-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 22
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen CADDY 09.20 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 18
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen GOLF V 10.03 – 02.09
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 17
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen GOLF V 06.07 – 07.09
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 17
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen GOLF VI 10.08 – 11.13
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S1-6-14-50-27-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 20
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen GOLF VI 07.09 – 07.13
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S1-6-14-50-27-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 20
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen GOLF VI 03.11 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S1-6-14-50-27-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 20
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen GOLF VI 01.05 – 12.13
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S1-6-14-50-27-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 32
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen GOLF VII 08.12 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 18
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen GOLF VII 04.13 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 18
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen GOLF VII 02.14 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 18
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen GOLF VII 12.14 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 18
- Catalogue note references: S3
- Fitting note S3: Only for use on the front axle!
Volkswagen GOLF VIII 07.19 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 13
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen GOLF VIII 08.20 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 13
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen GOLF VIII 11.20 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 13
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen ID.3 11.19 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 28
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen ID.4 09.20 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 24
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen ID.5 07.21 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 25
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen ID.7 06.23 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 25
- Catalogue note references: S77, S100
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
- Fitting note S100: Only when using rims with 5×45° internal chamber.
Volkswagen ID.7 02.24 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 25
- Catalogue note references: S77, S100
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
- Fitting note S100: Only when using rims with 5×45° internal chamber.
Volkswagen ID.BUZZ 05.22 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 25
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen ID.BUZZ 04.22 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 25
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen JETTA 08.05 – 10.10
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 17
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen JETTA 04.10 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S1-6-14-50-27-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 17
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen PASSAT 11.00 – 05.05
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 25
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen PASSAT 11.00 – 05.05
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 25
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen PASSAT 03.05 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 12
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen PASSAT 08.05 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 12
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen PASSAT 05.08 – 01.12
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 14
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen PASSAT 08.10 – 12.14
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 12
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen PASSAT 01.12 – 12.14
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 12
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen PASSAT 08.10 – 12.14
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 12
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen PASSAT 08.14 –
- Catalogue certificate code: T
- Type-approval supplement from: 37 / 11
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S1-6-14-50-27-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 12
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen PASSAT 08.14 –
- Catalogue certificate code: T
- Type-approval supplement from: 37 / 11
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S1-6-14-50-27-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 12
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen PASSAT 10.23 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 25
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen POLO 06.17 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 100/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 10
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen SCIROCCO 05.08 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S1-6-14-50-27-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 11
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen SHARAN 05.10 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S1-6-14-50-27-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 5
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen T-CROSS 12.18 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 100/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 20
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen T-ROC 07.17 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 13
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen T-ROC 12.19 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 13
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen TAIGO 09.21 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 100/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 19
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen TAYRON 11.24 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 22
- Catalogue note references: S77, S100
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
- Fitting note S100: Only when using rims with 5×45° internal chamber.
Volkswagen TIGUAN 09.07 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S1-6-14-50-27-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 3
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen TIGUAN 11.07 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S1-6-14-50-27-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 3
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen TIGUAN 02.16 –
- Catalogue certificate code: T
- Type-approval supplement from: 24, 15
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S1-6-14-50-27-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 8
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen TIGUAN 03.17 –
- Catalogue certificate code: T
- Type-approval supplement from: 24, 15
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S1-6-14-50-27-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 8
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen TIGUAN 09.23 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 22
- Catalogue note references: S77, S100
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
- Fitting note S100: Only when using rims with 5×45° internal chamber.
Volkswagen TOURAN 02.03 – 05.10
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 17
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen TOURAN 02.03 – 05.10
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): M14x1,5×27, KU r=13
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 17
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen TOURAN 05.10 – 05.15
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S1-6-14-50-27-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 17
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Volkswagen TOURAN 05.10 – 05.15
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 2
- Colour: Silver
- Original bolt reference (information only): S1-6-14-50-27-17
- Component stamping: 91210027
- Bolt pattern / number of holes: 112/5
- Centre bore: 57
- Thread: M14x1,5
- Offset limit: 17
- Catalogue note references: S77
- Fitting note S77: If there is a centering cover (grease cap), this must be removed from the wheel hub and placed on the spacer.
Track widening is the total across the axle. Confirm the spacer thickness per wheel, fixing system, bolt engagement and wheel clearance against the exact kit instructions.
Check the manufacturer part number S90-2-10-027 and follow the fitting instructions for that exact part. Do not fit the product where the vehicle specification differs from the listed application or certificate conditions.
Manufacturer range illustration; the exact components and fittings vary by application.
