Eibach S90-6-10-037-N is listed as Pro-Spacer in the supplied manufacturer catalogue. Match the vehicle, original equipment and fitting conditions below before ordering.
Vehicle applications and specification
Hyundai i20N 04.21 –
- Catalogue certificate code: T
- Total track widening (mm): 20
- Spacer system: 6N
- Colour: Silver
- Component stamping: 91610002
- Bolt pattern / number of holes: 114,3/5
- Centre bore: 67
- Thread: M12x1,5
- Offset limit: 35
- Catalogue note references: S86
- Fitting note S86: This kit contains additional tapered flange wheel nuts with an extended shaft that must be used in place of the stock wheel nuts. The rim must not be fastened with the original wheel nuts when using the spacer, as the original wheel nuts are too short to allow sufficient fastening of the rim. If accessory rims are used, it must be checked whether the holes in the rim have at least 15mm for thread size M12 and at least 16mm for thread size M14. When using accessory rims that are attached with round head nuts, use of the Pro-Spacers is prohibited. Use with rims that are fastened with spherical collar nuts is not permitted with these nuts!
Track widening is the total across the axle. Confirm the spacer thickness per wheel, fixing system, bolt engagement and wheel clearance against the exact kit instructions.
Check the manufacturer part number S90-6-10-037-N and follow the fitting instructions for that exact part. Do not fit the product where the vehicle specification differs from the listed application or certificate conditions.
Manufacturer range illustration; the exact components and fittings vary by application.
