H&R 33388-2 is an anti-roll bar kit for the vehicle applications below. Check the chassis, engine and any build-date or original-equipment restrictions before ordering.
Bar specifications
- Front: H&R 33388 VA (F); 22 mm; fixed; 105 mm effective lever arm
- Rear: H&R 33325 HA4 (R); 25 mm; fixed; 80 mm effective lever arm
This anti-roll-bar product does not provide ride-height adjustment.
Vehicle applications
The rear bar uses the supplied clamps and brackets. Follow the Audi A2-specific installation instructions linked below; its mounting differs from the front bar.
Audi A2 (8Z0)
- 1.4 TDI | 55kW | 1422cc | 3 cyl.
- 1.4 | 55kW | 1390cc | 4 cyl.
- 1.4 TDI | 66kW | 1422cc | 3 cyl.
- 1.6 FSI | 81kW | 1598cc | 4 cyl.
Fitting notes
- Where replacement mountings are not supplied, reuse the original mounting components only if they are in like-new condition; replace worn parts before fitting.
- H&R permits the front bar to be used without the rear bar, but warns that this may increase understeer. H&R has not tested or verified using the rear bar on its own.
- Follow H&R’s installation instructions and the documents for this exact part number.
Manufacturer-listed documents: with TÜV® certificate. Check the part-specific document for its application conditions.
View H&R’s part-specific technical information and documents.
Fitting documents
Use the supplied front-bar mounting hardware and bushes. The rear bar clamps around the rear axle and attaches at the lower damper mountings using the supplied hardware. H&R specifies a 620 mm clamp centre distance and final tightening of the lower damper attachments with the car on the ground. Have a suspension specialist follow the complete illustrated instructions, check clearances and use the specified tightening torques.
- Complete H&R part-specific certificate
- H&R general anti-roll-bar installation instructions
- Audi A2-specific installation instructions
Product image
The manufacturer supplies a representative H&R product photograph. The bar shape, mounting components and appearance can differ for this application; use the part number and specifications to select the product.
Ordering from GSM Performance
This part is ordered from our supplier. Contact us for the current lead time. Send your registration or VIN and any suspension or exhaust modifications if you would like help checking the application.
