H&R 33865-2 is an anti-roll bar kit for the vehicle applications below. Check the chassis, engine and any build-date or original-equipment restrictions before ordering.
Bar specifications
- Front: H&R 33 865 VA2; 25 mm; fixed; 355 mm effective lever arm
- Rear: H&R 33 865 HA; 25 mm; fixed; 292 mm effective lever arm
This anti-roll-bar product does not provide ride-height adjustment.
Vehicle applications
Only for the listed GTI, TDI and VR6 applications with five-stud wheel hubs (Plus suspension). The rear bar is an additional bar fitted with supplied clamps and mounting hardware. Check rear-bar clearance with any aftermarket exhaust.
Volkswagen Corrado (53I)
- 2.8 VR6 | 128kW | 2792cc | 6 cyl.
- 2.9 VR6 | 140kW | 2861cc | 6 cyl.
Volkswagen Golf III (1H1)
- 1.9 TDI | 81kW | 1896cc | 4 cyl.
- 2.0 GTI 16V | 110kW | 1984cc | 4 cyl.
- 2.8 VR6 | 120kW | 2792cc | 6 cyl.
- 2.8 VR6 | 128kW | 2792cc | 6 cyl.
Volkswagen Golf III Cabriolet (1E7)
- 1.9 TDI | 66kW | 1896cc | 4 cyl.
- 1.9 TDI | 81kW | 1896cc | 4 cyl.
Volkswagen Golf IV Cabriolet (1E7)
- 1.9 TDI | 66kW | 1896cc | 4 cyl.
- 1.9 TDI | 81kW | 1896cc | 4 cyl.
Volkswagen Vento (1H2)
- 1.9 TDI | 81kW | 1896cc | 4 cyl.
- 2.8 VR6 | 120kW | 2792cc | 6 cyl.
- 2.8 VR6 | 128kW | 2792cc | 6 cyl.
Fitting notes
- Only for cars with five-stud wheel hubs (Plus suspension).
- Where replacement mountings are not supplied, reuse the original mounting components only if they are in like-new condition; replace worn parts before fitting.
- Check clearance between the rear anti-roll bar and any aftermarket exhaust. Resolve possible contact before the vehicle is driven.
- H&R permits the front bar to be used without the rear bar, but warns that this may increase understeer. H&R has not tested or verified using the rear bar on its own.
- Follow H&R’s installation instructions and the documents for this exact part number.
Manufacturer-listed documents: with TÜV® certificate. Check the part-specific document for its application conditions.
View H&R’s part-specific technical information and documents.
Fitting documents
Fit the front bar at the original mounting points. The rear bar uses the supplied clamps and lower damper attachments. The illustrated rear instructions specify removal of the ABS-cable cover, grinding its two mounting studs, 580 mm clamp centre spacing and securing the ABS cable clear of moving parts without tension. Have a suspension specialist follow the complete document and check exhaust clearance before use.
- Complete H&R part-specific technical document
- H&R general anti-roll-bar installation instructions
- H&R 33865 rear-bar and ABS-cable mounting instructions
Product image
The manufacturer supplies a representative H&R product photograph. The bar shape, mounting components and appearance can differ for this application; use the part number and specifications to select the product.
Ordering from GSM Performance
This part is ordered from our supplier. Contact us for the current lead time. Send your registration or VIN and any suspension or exhaust modifications if you would like help checking the application.
