The TEIN FLEX Z VSHA2-C1AA1 is a vehicle-specific coilover kit for the UK-market applications listed below. It combines twin-tube dampers with 16-level adjustment of compression and rebound together. Use the recommended ride-height settings for your exact application when planning your setup.
Check your vehicle
Rear interior trim may need cutting or removal to prevent interference. TEIN lists an adjustable front camber mount and reuse of the standard rear upper mount.
UK vehicle applications and ride-height settings
All height figures below are changes relative to original equipment ride height. A negative figure means lowering; a positive figure means raising. TEIN distinguishes the maximum adjustable range from the recommended range established by testing. The maximum figure is not a recommended operating setting. Actual height can vary with vehicle condition and equipment.
Honda CIVIC FN2 2007-2011
- Engine displacement: 2000 cc
- Drive: Front-wheel drive
- Grade / application: TYPE R
- Recommended front height change: -35 to -15 mm
- Recommended rear height change: -35 to -15 mm
- Maximum front adjustable range: -71 to +16 mm
- Maximum rear adjustable range: -50 to -3 mm
- TEIN reference setting: -25 mm front; -25 mm rear
- Spring rates: 7 kgf/mm front; 5 kgf/mm rear
Before installation
Have the kit installed and aligned by a suspension specialist. Check wheel, tyre and body clearance through the full steering and suspension travel. Use the installation instructions supplied with the kit; they determine the correct assembly and permitted settings. Optional EDFC electronics are not included in this listing.
Ordering and product image
Available to order through our supplier network. Contact GSM Performance to confirm current availability and lead time before booking installation. The supplier catalogue photograph shows selected components associated with this part number, rather than every item supplied.
Application specifications: TEIN UK manufacturer catalogue for VSHA2-C1AA1. Product family: TEIN FLEX Z.
Will this fit my car?
This listing is for the Honda Civic Type R FN2. Chassis code, model year, engine and drivetrain all matter, and TEIN often use different part numbers for cars that look the same, so check your car against the vehicle table in the description. If anything is unclear, send us your registration or VIN and we will check it before you order.
What can I adjust?
The TEIN FLEX Z uses twin-tube dampers with 16-level adjustable damping, and the ride height is adjustable.
What comes in the kit?
Coilovers front and rear. Spring rates are 7 kgf/mm front and 5 kgf/mm rear.
How low will it go?
TEIN publish a recommended height range for each application, worked out in their own testing, and a wider maximum range that is not a recommended setting. For this kit the recommended setting is 15 to 35 mm lower at the front and 15 to 35 mm lower at the rear. Our guide Ride Height, Preload And Getting A Coilover Setup Right explains how to set it without running out of travel.
Is it right for road or track?
It depends how much of your driving is on track. Our guide Fast Road Or Track: Choosing The Damping On A Set Of Coilovers explains what 1-way, 2-way and 3-way adjustment gets you.
Can I fit it myself?
Our guide Fitting Coilovers At Home Or Having Them Done covers what the job involves. Either way, have the wheel alignment checked after fitting and check wheel and tyre clearance through full steering lock and suspension travel.
Can they be rebuilt?
TEIN run a replacement service for FLEX Z dampers rather than an overhaul, so a worn damper is swapped for a new unit. Ask us if you need one.
How long does it take?
This kit is ordered in from the supplier for your car. Ask us for the current lead time before you book the fitting.
More about this kit.
What ride-height information is listed for VSHA2-C1AA1?
For VSHA2-C1AA1, the catalogue gives: “Recommended: front -35 to -15 mm; rear -35 to -15 mm”. Use any front and rear figures with their listed vehicle and fitting conditions. Ask the installer to check the finished clearances and alignment.
Which spring rates are listed for VSHA2-C1AA1?
The catalogue lists: 7 kgf/mm front; 5 kgf/mm rear. Keep the front and rear labels and units with the specification. Check the selected application before requesting a different rate; matching spring dimensions and the damper specification also matter.
TEIN suspension: allow 3 to 5 weeks
Allow 3 to 5 weeks from your order for your TEIN suspension to reach you.
Need it by a particular date? Write the date in the order comments box at checkout when you order.
Gift box
GSM Performance Customer Car Colouring Book Edition 1
