TEIN FLEX Z combines twin-tube dampers with 16-level adjustment of compression and rebound together. This VSGP2-C1AA3 kit is listed for the specific applications below. Match your chassis, engine and model year before ordering.
Vehicle market: Chinese-market / Japanese-market / US-market applications only. Match the original vehicle market, chassis, engine, trim and build dates shown below. UK registration alone does not establish compatibility with UK-market versions.
Application limit: Applications omitted from this listing pending clarification of TEIN data: US-market MODEL Y – 2021-2025 (RWD). Compatibility is offered only for the complete applications below.
Vehicle applications and ride-height settings
Height changes are relative to original equipment ride height: negative values mean lowering and positive values mean raising. Use the recommended range for your exact vehicle. The maximum adjustment range describes mechanical travel and is not a recommended operating setting. Actual height varies with vehicle condition and equipment.
Tesla MODEL Y – 2021+ — Chinese-market
- Original vehicle market: Chinese-market
- Engine displacement: Electric; engine displacement not applicable
- Drive: Rear-wheel drive
- Grade / application: RWD
- Recommended front height change: -40 to -20 mm
- Recommended rear height change: -45 to -25 mm
- Maximum front adjustable range: -92 to +3 mm
- Maximum rear adjustable range: -51 to -12 mm
- TEIN reference setting: -30 mm front; -35 mm rear
- Spring rates: 9 kgf/mm front; 10 kgf/mm rear
- Upper mounts: Front: Rubber upper mount; rear: Rubber upper mount
Tesla MODEL Y YL1YT 2022.06-2025.03 — Japanese-market
- Original vehicle market: Japanese-market
- Engine displacement: Electric; engine displacement not applicable
- Drive: Rear-wheel drive
- Grade / application: STANDARD RANGE
- Recommended front height change: -45 to -25 mm
- Recommended rear height change: -45 to -25 mm
- Maximum front adjustable range: -96 to -7 mm
- Maximum rear adjustable range: -51 to -12 mm
- TEIN reference setting: -35 mm front; -35 mm rear
- Spring rates: 9 kgf/mm front; 10 kgf/mm rear
- Upper mounts: Front: Rubber upper mount; rear: Rubber upper mount
Tesla MODEL Y YL1YT 2025.04+ — Japanese-market
- Original vehicle market: Japanese-market
- Engine displacement: Electric; engine displacement not applicable
- Drive: Rear-wheel drive
- Grade / application: STANDARD RANGE
- Recommended front height change: -40 to -20 mm
- Recommended rear height change: -35 to -15 mm
- Maximum front adjustable range: -81 to +14 mm
- Maximum rear adjustable range: -41 to -2 mm
- TEIN reference setting: -30 mm front; -25 mm rear
- Spring rates: 9 kgf/mm front; 10 kgf/mm rear
- Upper mounts: Front: Rubber upper mount; rear: Rubber upper mount
Fitting requirements for this application: Original ride height and the amount of lowering may vary with model year and trim level.
Tesla MODEL 3 – 2017+ — Chinese-market
- Original vehicle market: Chinese-market
- Engine displacement: Electric; engine displacement not applicable
- Drive: Rear-wheel drive
- Grade / application: STANDARD PLUS (EXCLUDING VEHICLES PRODUCED IN CHINA)
- Recommended front height change: -55 to -35 mm
- Recommended rear height change: -45 to -25 mm
- Maximum front adjustable range: -118 to +8 mm
- Maximum rear adjustable range: -57 to -18 mm
- TEIN reference setting: -45 mm front; -35 mm rear
- Spring rates: 9 kgf/mm front; 10 kgf/mm rear
- Upper mounts: Front: Rubber upper mount; rear: Rubber upper mount
Fitting requirements for this application: Rear: TEIN recommends EDFC because the vehicle structure makes manual damping adjustment difficult.
Tesla MODEL 3 – 2017+ — Chinese-market
- Original vehicle market: Chinese-market
- Engine displacement: Electric; engine displacement not applicable
- Drive: Rear-wheel drive
- Grade / application: STANDARD PLUS (VEHICLES PRODUCED IN CHINA)
- Recommended front height change: -55 to -35 mm
- Recommended rear height change: -50 to -30 mm
- Maximum front adjustable range: -126 to -1 mm
- Maximum rear adjustable range: -66 to -27 mm
- TEIN reference setting: -45 mm front; -40 mm rear
- Spring rates: 9 kgf/mm front; 10 kgf/mm rear
- Upper mounts: Front: Rubber upper mount; rear: Rubber upper mount
Fitting requirements for this application: Rear: TEIN recommends EDFC because the vehicle structure makes manual damping adjustment difficult.
Tesla MODEL 3 – 2017-2023 — US-market
- Original vehicle market: US-market
- Engine displacement: Electric; engine displacement not applicable
- Drive: Rear-wheel drive
- Grade / application: STANDARD RANGE / PLUS
- Recommended front height change: -55 to -35 mm
- Recommended rear height change: -45 to -25 mm
- Maximum front adjustable range: -118 to +0 mm
- Maximum rear adjustable range: -57 to -18 mm
- TEIN reference setting: -45 mm front; -35 mm rear
- Spring rates: 9 kgf/mm front; 10 kgf/mm rear
- Upper mounts: Front: Rubber upper mount; rear: Rubber upper mount
Fitting requirements for this application: Rear: TEIN recommends EDFC because the vehicle structure makes manual damping adjustment difficult.
Tesla MODEL 3 – 2024+ — US-market
- Original vehicle market: US-market
- Engine displacement: Electric; engine displacement not applicable
- Drive: Rear-wheel drive
- Grade / application: STANDARD RANGE / PLUS
- Recommended front height change: -55 to -35 mm
- Recommended rear height change: -45 to -25 mm
- Maximum front adjustable range: -118 to +0 mm
- Maximum rear adjustable range: -57 to -18 mm
- TEIN reference setting: -45 mm front; -35 mm rear
- Spring rates: 9 kgf/mm front; 10 kgf/mm rear
- Upper mounts: Front: Rubber upper mount; rear: Rubber upper mount
Fitting requirements for this application: Rear: TEIN recommends EDFC because the vehicle structure makes manual damping adjustment difficult.
Tesla MODEL 3 3L13 2019.09-2023.08 — Japanese-market
- Original vehicle market: Japanese-market
- Engine displacement: Electric; engine displacement not applicable
- Drive: Rear-wheel drive
- Grade / application: STANDARD RANGE PLUS
- Recommended front height change: -45 to -25 mm
- Recommended rear height change: -45 to -25 mm
- Maximum front adjustable range: -113 to +13 mm
- Maximum rear adjustable range: -57 to -18 mm
- TEIN reference setting: -35 mm front; -35 mm rear
- Spring rates: 9 kgf/mm front; 10 kgf/mm rear
- Upper mounts: Front: Rubber upper mount; rear: Rubber upper mount
Fitting requirements for this application: Rear: TEIN recommends EDFC because the vehicle structure makes manual damping adjustment difficult.
Installation and ordering
Use a suspension specialist for installation and wheel alignment. Follow the supplied instructions and check tyre, body and suspension clearance throughout steering and suspension travel. Optional EDFC electronics are sold separately.
Supplied to order. Contact GSM Performance for current availability and lead time before booking installation.
Product photograph
The supplier catalogue photograph shows selected components associated with this part number; it is not a complete contents layout.
Application data: TEIN UK catalogue for VSGP2-C1AA3.
