TEIN MONO SPORT combines monotube dampers with 16-level adjustment of compression and rebound together. This GSH64-71SS3 kit is listed for the specific applications below. Match your chassis, engine and model year before ordering.
Vehicle market: UK-market applications only. Match the chassis, engine, trim and production dates shown below. Other-market imports require separate confirmation.
Vehicle applications and ride-height settings
Height changes are relative to original equipment ride height: negative values mean lowering and positive values mean raising. Use the recommended range for your exact vehicle. The maximum adjustment range describes mechanical travel and is not a recommended operating setting. Actual height varies with vehicle condition and equipment.
Honda S2000 AP1 2000-2003 — UK-market
- Original vehicle market: UK-market
- Engine displacement: 2000 cc
- Drive: Rear-wheel drive
- Grade / application: See chassis, engine and years above
- Recommended front height change: -35 to -15 mm
- Recommended rear height change: -45 to -25 mm
- Maximum front adjustable range: -118 to +54 mm
- Maximum rear adjustable range: -113 to +39 mm
- TEIN reference setting: -25 mm front; -35 mm rear
- Spring rates: 12 kgf/mm front; 10 kgf/mm rear
- Upper mounts: Front: Rubber upper mount; rear: Rubber upper mount
- Full-length ride-height adjustment: Front and rear: supported by TEIN for this application
- Optional EDFC compatibility: Confirmed by TEIN for this application; controller and required accessories sold separately
Honda S2000 AP2 2003-2009 — UK-market
- Original vehicle market: UK-market
- Engine displacement: 2200 cc
- Drive: Rear-wheel drive
- Grade / application: See chassis, engine and years above
- Recommended front height change: -25 to -5 mm
- Recommended rear height change: -25 to -5 mm
- Maximum front adjustable range: -108 to +64 mm
- Maximum rear adjustable range: -93 to +59 mm
- TEIN reference setting: -15 mm front; -15 mm rear
- Spring rates: 12 kgf/mm front; 10 kgf/mm rear
- Upper mounts: Front: Rubber upper mount; rear: Rubber upper mount
- Full-length ride-height adjustment: Front and rear: supported by TEIN for this application
- Optional EDFC compatibility: Confirmed by TEIN for this application; controller and required accessories sold separately
Installation and ordering
Use a suspension specialist for installation and wheel alignment. Follow the supplied instructions and check tyre, body and suspension clearance throughout steering and suspension travel. Optional EDFC electronics are sold separately. Compatibility depends on the specific application; check the application entry above.
Supplied to order. Contact GSM Performance for current availability and lead time before booking installation.
Product photograph
This is a representative TEIN MONO SPORT range photograph. The pictured mounting hardware and layout may differ from this vehicle-specific kit. Select by part number and the application specification, not the photograph.
Application data: TEIN UK catalogue for GSH64-71SS3.
