Eibach E10-20-014-13-22 replaces the original springs on the BMW 3 Series Coupe (E92) applications listed below. This four-spring Pro-Kit provides a fixed reduction in ride height while retaining the existing dampers, subject to their condition and the fitting document.
Lowering and axle limits
- Front lowering: approximately 35 mm
- Rear lowering: approximately 25 mm
- Maximum permitted front axle load: 990 kg
- Maximum permitted rear axle load: 1090 kg
These are the current Eibach catalogue lowering figures for the listed applications. Actual ride height varies with original suspension, equipment and vehicle tolerances. Any existing factory lowering reduces the additional drop. This is a fixed spring kit; ride height is not adjustable.
Vehicle applications
- BMW 320d Coupe (E92): 09/2006 to 02/2010; 1995 cc diesel; 145 kW / 197 PS; engine N47 D20 A, N47 D20 C.
- BMW 325d Coupe (E92): 02/2007 to 02/2010; 2993 cc diesel; 145 kW / 197 PS; engine M57 D30 (306D3).
- BMW 325d Coupe (E92): 09/2009 to 06/2013; 2993 cc diesel; 150 kW / 204 PS; engine N57 D30 A.
- BMW 325d Coupe (E92): 02/2007 to 02/2010; 2993 cc diesel; 155 kW / 211 PS; engine M57 D30 (306D3).
- BMW 330d Coupe (E92): 03/2006 to 08/2008; 2993 cc diesel; 170 kW / 231 PS; engine M57 D30 (306D3).
- BMW 330d Coupe (E92): 01/2009 to 06/2013; 2993 cc diesel; 180 kW / 245 PS; engine N57 D30 A.
- BMW 335d Coupe (E92): 03/2006 to 03/2013; 2993 cc diesel; 210 kW / 286 PS; engine M57 D30 (306D5).
- BMW 335i Coupe (E92): 06/2006 to 06/2013; 2979 cc petrol; 225 kW / 306 PS; engine N55 B30 A, N54 B30 A.
- BMW 335i Coupe (E92): 06/2006 to 06/2013; 2979 cc petrol; 240 kW / 326 PS; engine N55 B30 A, N54 B30 A.
For rear-wheel-drive vehicles without self-levelling suspension. Check the permitted axle weights on the vehicle identification plate, not its unladen weight. Match the chassis, engine and spring part numbers before ordering.
Kit contents and identification
- 2 x F11-20-013-02-VA – front springs
- 2 x F11-20-013-01-HA – rear springs
Dampers are not included. The spring markings and complete fitting certificate identify the correct components for your vehicle.
Installation details
- Have a suitably equipped workshop fit the springs and check wheel alignment and headlamp aim afterwards.
- Inspect the dampers, spring seats and mounting components, and replace worn parts before installation.
- Retain the original bump stops specified in the fitting certificate. Follow its limits on replacement dampers and spring seats.
- Check wheel and tyre clearance and the conditions for any other modifications. Lower ground clearance needs to be considered on ramps and uneven surfaces.
Download the manufacturer fitting certificate and Eibach application notes A, 18 and 20. The certificate includes German approval information and technical fitting conditions.
Product image
Eibach supplies this representative Pro-Kit photograph for the part number. Spring shape and appearance may differ; the listed part numbers and technical specifications identify the kit.
Ordering from GSM Performance
Ordered from our supplier. Contact us for the current lead time. Send your registration or VIN and details of any suspension modifications if you would like help confirming fitment.
