This Honda Accord Vigor 1984 1989 Momo Steering is the hub that lets you fit an aftermarket wheel to the factory steering column. It is machined for this vehicle specifically, so the splines and the depth are already right. A universal hub will not do the same job.
Machined from aluminium by MOMO, and supplied with the fixings required to complete the installation.
Honda Accord Vigor 1984 1989 Momo Steering specification
| Vehicle | Honda Accord / Vigor (1984-1989) |
|---|---|
| Brand | MOMO |
| Material | Aluminium |
| Manufacturer | Honda |
| Part number | MK4903(HondaAccord/Vigor-1984-1989) |
Which steering wheels fit this boss kit?
Check the bolt pattern on the back of your steering wheel against the hub before ordering. If you are unsure, send us the wheel make and model and we will confirm it.
Browse the steering wheels we stock if you still need the wheel itself. Worth a read if this is your first swap: how aftermarket steering wheels mount.
What a boss kit does
An aftermarket steering wheel will not bolt to a car’s column on its own. The hub sits between the two, matching the column splines on one side and the wheel bolt pattern on the other. It also sets how far the wheel sits from the dash, which affects your reach to the stalks and the clearance to your knees.
If the car has a driver airbag, that airbag is lost when the standard wheel comes off. Disconnect the battery and leave the system to discharge before you start, and get the airbag handled properly rather than leaving it hanging off the column. Tell your insurer the car has been modified.
Fitting the Honda Accord Vigor 1984 1989 Momo Steering
Centre the road wheels before you take the old wheel off and mark the column so the new wheel goes back on straight. The hub bolts to the column first, then the wheel bolts to the hub. Torque the centre nut properly, it is the only thing holding the wheel on.
The hub carries the horn contact through to the wheel. Connect it during the fit rather than after.
Once it is together, check the wheel clears the indicator and wiper stalks through full lock in both directions, and that nothing catches on the way round.
Honda Accord Vigor 1984 1989 Momo Steering questions
Does the Honda Accord Vigor 1984 1989 Momo Steering come with fixings?
Yes. The kit is supplied with the screws needed to mount the wheel to the hub. You will reuse the column nut from the standard wheel.
Will the Honda Accord Vigor 1984 1989 Momo Steering fit any steering wheel?
Check the bolt pattern on your wheel against the hub before ordering. Send us the wheel make and model if you want it confirmed.
Do I lose the airbag?
Yes. Removing the standard wheel removes the driver airbag on any car fitted with one. Disconnect the battery first, have the airbag dealt with properly, and let your insurer know the car has been modified.
Will the horn still work?
The horn contact carries through the hub, so it works with a wheel that has a horn push. Wire it up while the wheel is off.
Is this the right hub for my Honda Accord / Vigor (1984-1989)?
It is machined for this application. If your car sits near a model year change or has had a column replaced, send us the registration and we will check it before you order.
Not sure on fitment? Give us the reg and we will confirm the Honda Accord Vigor 1984 1989 Momo Steering suits your column before you buy.
More options: steering wheel boss kits. Other MOMO hubs: Toyota Shion XA/XB (All Years), Toyota Runner (All Years), Toyota Pick Up (All Years).
