A replacement peak for the Sparco Flux open face helmets. Part number BRA0006B0.
The peak is the most exposed part of an open face helmet and the first thing to get broken, usually by the helmet going down on a bench awkwardly or into a bag with something hard next to it. Replacing it is a fraction of the cost of a new lid and it is a job you can do yourself: there are four mounting holes and nothing else to it.
What it fits
The Sparco Flux RJ and the Flux RJ-i Carbon. Check your helmet against those before you order, because helmet parts are not interchangeable across models and one that nearly fits will lift at speed.
Black, white or carbon. The carbon peak is the one to pick if you have the RJ-i and want the parts to match, and it also works as a change of look on a plain black helmet.
Worth carrying a spare
If you run an open face lid regularly, a spare peak in the kit bag is cheap insurance. Turning up to an event with a cracked peak that rattles is a small problem that becomes a large distraction over a race distance.
An open face helmet needs eye protection alongside it in most regulations. If you need a visor or goggles as well, ask us.
Have you written anything about this exact product?
Yes, we have covered this exact product: New OMP J-R Open Face Helmets Arrive For 2022. That is first-hand coverage from our own builds and showroom, not brochure copy.
How do I get the right size?
Measure around your head at the widest point, about an inch above your eyebrows, and match the centimetres to the size options. The fit should be snug all round with no pressure points, and it should not rotate when you shake your head. Between sizes, try the smaller one first, as linings bed in. Our helmet buying guide covers fit in detail, or call us and we will talk it through.
Can I use it for track days?
Yes. What it is not valid for is Motorsport UK competition, which needs a helmet from the FIA and Snell list. If you are heading towards racing, buy once from our motorsport helmet range instead. Our track day kit guide covers what you need for your first sessions.
How do I look after it?
Store it in its bag away from heat and direct sun, clean the shell with mild soap and water only (solvents attack the finish and the shell), and let the lining air out after use. And the big one: after any significant impact, replace the helmet even if it looks fine, as the protective liner is designed to crush once.
At GSM Performance, our priority is to maintain the utmost hygiene and quality standards for the benefit of our customers. To that end, we have instituted a policy that all purchases of long johns, balaclavas, tops, and underwear are final and non-returnable. This policy is necessary due to the personal nature of these items, which are worn in close contact with the body. This protocol is intended to guarantee the health and safety of all our customers.
This policy adheres to the best industry practices and safeguards both our customers and our staff. It's important to clarify that this policy does not affect your statutory rights as a consumer. This policy does not apply if you receive damaged or defective products. In such cases, our customer service team is available to promptly address your concerns and arrange a replacement or refund. We greatly appreciate your understanding and adherence to our hygiene policy and thank you for your continued confidence in GSM Performance. For further information please see our terms and conditions which are agreed on checkout.
Is it time to replace your race suit? Let’s get you track-ready. 
